Written safety programs for general contractors, commercial builders, and subcontractors

Every commercial job site

• Fall ProtectionUnprotected sides and edges, holes, leading edges, and roofs six feet or more above a lower level.Basis: 29 CFR 1926 Subpart M (1926.500–1926.503)
• ScaffoldsErecting, inspecting, and working from supported and suspended scaffolds.Basis: 29 CFR 1926 Subpart L (1926.450–1926.454)
• Ladder SafetyPortable and fixed ladders and stairways on site.Basis: 29 CFR 1926 Subpart X (1926.1050–1926.1060)
• Struck-By HazardsBacking equipment and trucks, falling tools and materials, and loads overhead.Basis: 29 CFR 1926.20(b), 1926.100, and 1926 Subpart O (1926.600–1926.602)
• Electrical Safety AwarenessTemporary power, cords, and working near overhead lines.Basis: 29 CFR 1926 Subpart K (1926.400–1926.449)
• Ground Fault ProtectionGFCIs or an assured equipment grounding program for temporary power.Basis: 29 CFR 1926.404(b)(1)
• HazCom (Hazard Communication)Job-site chemicals, labels, SDSs, and sharing information with other employers on site.Basis: 29 CFR 1926.59 (same requirements as 1910.1200)
• Personal Protective EquipmentHard hats, eye and face protection, high-visibility clothing, gloves, and footwear.Basis: 29 CFR 1926 Subpart E (1926.95–1926.107)
• Silica Exposure ControlCutting, drilling, grinding, and demolishing concrete and masonry.Basis: 29 CFR 1926.1153
• Hand and Power ToolsGuarding, inspection, and safe use, including powder-actuated tools.Basis: 29 CFR 1926 Subpart I (1926.300–1926.307)
• Noise Exposure - Hearing ConservationSaws, jackhammers, compressors, and heavy equipment.Basis: 29 CFR 1926.52 and 1926.101
• Respiratory ProtectionWhen silica, welding fume, or another exposure calls for a respirator.Basis: 29 CFR 1926.103 (29 CFR 1910.134)
• Fire Prevention PlanFire protection, fuel storage, and temporary heating on site.Basis: 29 CFR 1926.24 and 1926 Subpart F (1926.150–1926.155)
• Welding, Cutting and Hot WorkGas and arc welding and cutting, fire watch, and cylinders.Basis: 29 CFR 1926 Subpart J (1926.350–1926.354)
• First AidFirst aid supplies and trained responders on site.Basis: 29 CFR 1926.50
• Housekeeping and Slip, Trip, and Fall PreventionKeeping debris, scrap, and cords out of walkways and work areas.Basis: 29 CFR 1926.25
• Heat Illness PreventionWater, rest, shade, and acclimatization for outdoor crews.Basis: OSH Act General Duty Clause, Section 5(a)(1)

Heavy work: lifting, equipment, and excavations

• CranesCrane assembly, operation, power-line clearance, and qualified operators.Basis: 29 CFR 1926 Subpart CC (1926.1400–1926.1442)
• Rigging Equipment for Material HandlingSlings, hardware, and rigging inspections.Basis: 29 CFR 1926.251; 1926.1404 and 1926.1425 for crane work
• Signaling for CranesQualified signal persons and standard hand signals.Basis: 29 CFR 1926.1419–1926.1422 and 1926.1428
• Aerial LiftsBoom and scissor lifts.Basis: 29 CFR 1926.453 (scissor lifts under 1926 Subpart L)
• Mobile EquipmentEarthmoving equipment, haulers, and compactors: inspections, backing, and seatbelts.Basis: 29 CFR 1926 Subpart O (1926.600–1926.602)
• Forklifts - Powered Industrial TrucksRough-terrain forklifts and telehandlers.Basis: 29 CFR 1926.602(c)–(d) (operator training per 1910.178(l))
• Excavation-TrenchingProtective systems, inspections, and a competent person.Basis: 29 CFR 1926 Subpart P (1926.650–1926.652)
• Damage PreventionLocating underground utilities before you dig.Basis: 29 CFR 1926.651(b), plus your state’s one-call (811) law
• Confined SpaceVaults, manholes, tanks, crawl spaces, and other permit spaces.Basis: 29 CFR 1926 Subpart AA (1926.1200–1926.1213)
• Concrete and Masonry ConstructionFormwork, shoring, rebar caps, post-tensioning, and masonry walls.Basis: 29 CFR 1926 Subpart Q (1926.700–1926.706)
• LOTO (Lockout/Tagout)Locking and tagging circuits and equipment before work.Basis: 29 CFR 1926.417 and 1926.702(j)
• Traffic ControlWork zones next to roads, parking lots, and site haul routes.Basis: 29 CFR 1926.200–1926.202 and the MUTCD (Part 6)
• Flagger and Spotter OperationsFlaggers in work zones and spotters for backing equipment.Basis: 29 CFR 1926.201 and 1926.601(b)(4)

Also in our catalog, if your crews do this work

• Steel ErectionStructural steel and metal deck erection.Basis: 29 CFR 1926 Subpart R (1926.750–1926.761)
• Structural DemolitionInterior and structural demolition.Basis: 29 CFR 1926 Subpart T (1926.850–1926.860)
• ROPS and Seatbelt UseRollover protection and seatbelts on earthmoving equipment.Basis: 29 CFR 1926.1000–1926.1002
• Asbestos AwarenessRenovation or demolition that may disturb asbestos-containing materials.Basis: 29 CFR 1926.1101
• Lead AwarenessRenovation, demolition, or torch cutting on lead-painted surfaces.Basis: 29 CFR 1926.62
• Hexavalent ChromiumWelding on stainless steel and work with some cements and coatings.Basis: 29 CFR 1926.1126
• Compressed Gas CylindersStoring, moving, and securing cylinders on site.Basis: 29 CFR 1926.350(a)

Management programs many companies add (tap one to add just that program)

• General Safety +
• Site-Specific Safety Plan +
• Contractor-Subcontractor Working Relations +
• Subcontractor Management Plan +
• Safety Inspections and Audits +
• Safety Meetings and Toolbox Talks +
• Incident Investigation +
• Emergency Action Plan +
• Injury and Illness Recordkeeping +

General Safety and Safety Inspections and Audits reflect the accident prevention program and competent-person inspection duties in 29 CFR 1926.20(b), Emergency Action Plan follows 29 CFR 1926.35 where another standard requires one, and Injury and Illness Recordkeeping follows 29 CFR Part 1904 where your company is covered. The others are not tied to a single OSHA standard; owners and general contractors often ask for them on multi-employer sites. This is a starting point, not a requirement list: what you need depends on your work, your state, and what your clients, insurer, or platform ask for.

Adds every program listed on this page to your quote selection. You can uncheck any you don’t need.

Your written quote shows the exact price for your list. Every quote compares per-program pricing against the Complete Library, so you get the lower price.